Time Display - Bresser WoW200 Manual Del Usario

the radio signal. It takes about 3-5 minutes to finish this process.
2. If user wishs to disable the auto-reception feature, hold the [ + ] button
for 2 seconds to disable it.
3. To enable the auto-reception feature again, holds the [ + ] for 2 sec-
onds again to force it receive and allow it receive at desired time.
4. If the radio signal is received, the date & time will be set automatically
with radio control signal icon [
5. If the clock fails to receive the time signal, it will be show as [
Then user can set the time manually.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE] for two seconds it will show the
display language. Use [ + ] or [ – ] to change it. Press [MODE] to con-
firm. Repeat the same procedure to set year, month, date, 12/24 hour
format, hour and minute. During the setting, use [ + ] or [ – ] will increase
or decrease the value rapidly. For display language, you are able to se-
lect English (En), German (DE), French (Fr), Italian (IT), Spanish (SP)
and Dutch (DU). If there is an item you do not need to change, simply
press [MODE] to bypass the item. When you finished the change, press
[MODE] to exit. The display will return to the clock mode.

TIME DISPLAY

In the normal display mode, you can use the [MODE] key to select from
the following display modes:
- Time display with seconds
- Time display with days of the week
- A second time zone with the days of the week
- A second time zone with seconds
HOW TO SET THE ZONE TIME
1. To set the zone time,
2. Press [MODE] until at zone time display mode which there is a 'ZONE'
icon on LCD display,
] turns on.
28
] icon.