Specifications - Honeywell TrueDRY DH65 Guía De Instalación Profesional

Specifications

Install TrueDRY DH65 according to National Electric Codes.
Dry-Bulb Wet-Bulb
Temp Temp
80°F 70°F
70°F 61°F
60°F 52°F
Home Size Dehumidifier Capacity Required to Maintain Desired Indoor RH*
(square ft)
60% RH Indoor (pints/day) 50% RH Indoor (pints/day) 40% RH Indoor (pints/day)
2080
2600
3120
* Based on extreme climates where outdoor humidity is 70-90% RH. For less extreme climates, larger homes can be
adequately served with less capacity. Actual requirements may vary.
Dimensions:
11-5/8
(295)
8 INCH (203)
11-1/2
DIAMETER
(292)
Product weight: 55 lbs
Shipping weight: 65 lbs
Shipping dimensions: 16 in. H x 15 in. W x 31 in. L
Media Filter: MERV 11, 9 in. H x 11 in. W x 1 in. D
Drain connection: 3/4-in. threaded female NPT
connection, with attached 3/4-in. male connection.
Duct connections: 8-in. round inlet and outlet. ABS
plastic, compatible for connection to rigid or
flexible ducting with sheet metal screws and/or
tape.
Cabinet: 20 gauge galvanized steel powder-coat
painted.
Insulation: R value 1
Compressor: Rotary-style
Refrigerant: R22, 1.0 oz.
Operating Temp Range (outside cabinet):
56ºF-95ºF (13ºC-35ºC)
Operating Humidity Range: 0-99% RH
Intake Capacity
Humidity (Pints/Day)
60% RH 65
60% RH 42
60% RH 21
49–54
61–68
75–82
27 (686)
21 (533)
M27329
55–58
65–72
79–86
Airflow versus external static pressure
(0–1 in. water pressure) with collars attached
0 in.
0.2 in.
0.4 in.
0.6 in.
Input ratings
• Electrical input voltage: 120VAC, 60 Hz nominal
• Input current: 5.5 amps
Output ratings
• Power transformer to R/C terminals: 24VAC,
0.85A
• Energy Performance: 2.02 liters per kilowatt hour
(KWH)
Standards and approval body requirements
Underwriters Laboratories (UL). Tested per standard UL
1997 ducted dehumidifier.

TrueDRY DH65
71–78
90–97
95–110
160 CFM
140 CFM
120 CFM
100 CFM
69-2089EFS—01