Festo CP-FB13-E Manual Del Usuario página 19

5 Addressing
The last used string in the example is 2:
Octet 1: O20.0...O20.7
(Octet 2: O21.0...O21.7)
PROFIBUS-DP
BUS ERROR
24 V DC
POWER POW ER V
SAVE
0
(Octet 3: O22.0...O22.7)
1
(Octet 4: O23.0...O23.7)
2
3
ERROR
Octet 5: O24.0...O24.7
(Octet 6: O25.0...O25.7
Address range occupied by the CP system
( ) = Reserved address range (occupied but unused)
1. A CP valve location occupies two addresses:
– lower-value address = pilot solenoid 14
– higher-value address = pilot solenoid 12.
2. Electric output or input modules occupy 16 output or
input addresses.
Festo CP-FB13-E 0112c English
Octet 1: I20.0...I20.7
Octet 2: I21.0...I21.7
(Octet 3: I22.0...I22.7)
(Octet 4: I23.0...I23.7)
Octet 5: I24.0...I24.7
) Octet 6: I25.0...I25.7
19