Resumen de contenidos para Canon PIXMA MX420 Serie
Página 1
ENGLISH ESPAÑOL Canon Inkjet Office All-In-One Equipo multifunción para oficina Canon Inkjet series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference.
■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados en este Document documento 1 Preparation P.4 1 Preparativos P.4 Prohibited actions. Acciones prohibidas. 2 Install the FINE Cartridges P.10 2 Instalación de los cartuchos FINE (FINE Cartridges) P.10 3 Load Paper P.14 Instructions including important Instrucciones que incluyen...
Página 3
■ Machine Installation Network Connection Flow USB Connection Conexión de red ■ Flujo de instalación Conexión USB Wireless Connection Wired Connection Using from Additional del equipo Computers Conexión inalámbrica Conexión por cable (when the machine is already connected to the network and you want to add computers from which to use the machine) Uso desde ordenadores...
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 44. Los manuales en pantalla se pueden ver en un ordenador.
Página 5
■ Devices Required for Wireless/Wired Connection ■ Dispositivos necesarios para la conexión inalámbrica/por cable When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. Cuando el equipo se utilice mediante una conexión inalámbrica/por cable, se necesitarán los dispositivos siguientes en función del método de conexión. Wireless Connection Wired Connection Conexión inalámbrica...
Página 6
Make sure all the following items are supplied. • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. 1. FINE cartridges (Color, Black) 5. Setup CD-ROM (containing the drivers, It may fall into the machine when opening covers, resulting in applications and on-screen manuals) 2.
Página 7
Do not connect the power cord yet. Remove all the protective materials 1. Open the Paper Output Tray (A). and orange tape from the outside of the 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). machine.
Página 8
Remove both the orange tape (E) and the protective material (F) 1. Lift the Scanning Unit (Cover) slightly. carefully. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Retire la cinta naranja (E) y el material protector (F) con cuidado. 1.
Página 9
Only when connecting a telephone or an answering machine Sólo al conectar un teléfono o un contestador automático Use fax features? Connect one end of supplied telephone line cable (G) to Remove the Cap (I) (1), then connect a telephone or an answering the lower connector labeled “L”...
Página 10
Insert the power cord into the connector on the Press the ON button (J) to turn on the Use the { or } button (K) on the Operation Panel to select the machine and into the wall outlet firmly. machine. language for the LCD (Liquid Crystal Display) (L), then press the OK button.
Página 11
When this screen is displayed, proceed to the next step. Cuando aparezca esta pantalla, continúe con el paso siguiente. When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo • Before removing the power plug, make sure that all the lamps on the Operation Panel are not lit. Removing the power plug while any of the lamps on the Operation Panel is lit or flashing may cause drying and clogging of the FINE Cartridges, resulting in poor printing.
Página 12
1. Make sure the Document Cover (A) is closed, then lift to open the Scanning The FINE Cartridge Follow the next Unit (Cover) (D). Holder (H) moves to the procedure to insert the installation position. Black and Color 2. Fix it with the Scanning Unit Support (E). FINE Cartridges into their If the FINE Cartridge Holder •...
Página 13
Open the Ink Cartridge Locking Cover on the right side. After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. Pinch (I) firmly and pull up the cover. •...
Página 14
Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until it snaps into place. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). •...
Insert the Color FINE 1. Lift the Scanning Unit (Cover) slightly. Wait for about 1 minute until the LCD changes as shown in the illustration, then Cartridge into the left proceed to the next step. 2. Fold the Scanning Unit Support. FINE Cartridge Holder 3.
Página 16
Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Make sure that the height of the paper stack does not exceed the line (D).
Página 17
Depending on your needs, select one of the following three modes for receiving faxes. You can Read this section change the receive mode after installation is complete. For details, refer to “Setting the Receive only when using the Mode” in the on-screen manual: Basic Guide. fax features.
Página 18
Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives When a voice call arrives Si recibe una llamada de fax Si recibe una llamada de voz While the telephone's ringtone While the telephone's ringtone sounds, pick up the handset.
Página 19
Press the FAX button (A). Press the center FUNCTION button (B). Use the { or } button (C) to select a receive mode, then press the OK button. The fax standby screen returns. Pulse el botón FAX (A). Pulse el botón FUNCIÓN (FUNCTION) central (B). Utilice el botón { o } (C) para seleccionar un modo de recepción y, a continuación, pulse el botón OK.
Intended Use Connection Method Uso previsto Método de conexión • Connect to a computer with a USB cable. USB Connection Go to “6 Install the Software (USB Connection)” on page 19. • Conectar a un ordenador con un cable USB. Conexión USB Vaya a “6 Instalación del software (Conexión USB)”...
Página 21
Do not connect the USB cable yet. For Spanish Users in the U.S.A. Para los usuarios de habla hispana en EE. UU. No conecte aún el cable USB. To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer’s hard disk.
Easy-WebPrint EX Easy-WebPrint EX If the USB cable is connected before the software is installed Si el cable USB está conectado antes de instalar el software Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 30 seconds until the machine turns off.
Página 23
Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. 1. Make sure that the machine has turned off.
Página 24
Click Easy Install. Click Install. Select Use the printer via USB, then click Next. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install.
Página 25
USB Port If the Extended Survey Program If the serial number is not displayed on the registration screen, input the number found inside the machine. screen appears Puerto USB Si el número de serie no aparece en la pantalla de registro, Si aparece la pantalla Extended Survey introduzca el que viene en el interior del equipo.
It is necessary to restart the computer before scanning For Macintosh using the Operation Panel on the machine for the first Solution Menu EX starts when clicking OK in the Canon time. Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place.
Before Configuring Wireless Settings Antes de configurar la conexión inalámbrica After confirming the connection, perform the following Make sure that the computer and access point or router are instructions to add (connect) the machine to the network. connected. Asegúrese de que el ordenador y del punto de acceso o del Después de confirmar la conexión, siga las instrucciones router están conectados.
Página 28
Contraseña para evitar el acceso no autorizado a la red. You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant which can be downloaded from the Canon support webpage (www.usa.canon.com/WirelessHelp). If you are unable to retrieve the network key or other settings, refer to the manual of your access point or router, or contact its manufacturer.
1. Press the Setup button (A). Select Easy setup, then Use the { or } button (C) to select Select the access point press the OK button. Yes, then press the OK button. name you wrote down on 2. Use the [ or ] button (B) to select Wireless LAN setup. page 26, then press the 3.
Página 30
Make sure that the When one of the above screens is displayed, enter the network key you wrote When the above screen appears, press the OK network key is correct, down on page 26 using the Numeric buttons (E), then press the OK button. button.
Before Configuring Wired Settings Antes de configurar la conexión cableada Make sure that the computer and router are connected. After confirming the connection, perform the following instructions to add (connect) the machine to the network. Asegúrese de que el ordenador y el router están conectados. Después de confirmar la conexión, siga las instrucciones detalladas a continuación para agregar (conectar) el equipo a la red.
Página 32
Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet 1. Press the Setup button (C). cable (B). 2. Use the [ or ] button (D) to select Device settings. 3. Press the OK button. Retire la tapa (A); a continuación, conéctese a un dispositivo de red (router, etc.) 1.
Página 33
Use the { or } button (E) to select LAN settings, Select Change wireless/ Select Wired LAN active, then press the OK button. then press the OK button. wired, then press the OK button. Next, read “9 Install the Software (Network Connection)” on page 32! Utilice el botón { o } (E) para seleccionar Seleccione Cambiar Seleccione LAN cableada activa (Wired LAN active) y, a continuación, pulse el...
Página 34
To use the machine by connecting it to a For Spanish Users in the U.S.A. Easy-WebPrint EX computer, software including the drivers needs to be copied (installed) to the computer’s hard Para los usuarios de habla hispana Easy-WebPrint EX disk. The installation process takes about 20 en EE.
Página 35
Windows 7/Windows Vista Windows XP Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. Turn on the computer, then If the User Account Control dialog box reappears in following steps, click Yes or Continue. insert the Setup CD-ROM into the CD-ROM drive.
Página 36
Click Easy Install. Click Install. If you select wireless connection on page 18 Select Use the printer with wireless LAN The drivers, application software, and on-screen connection, then click Next. manuals are installed. If you select wired connection on page 18 •...
Página 37
18, in • If the Check Printer Settings dialog box is displayed or the machine is not displayed in the Canon IJ Network Tool screen, refer to the printed manual: Network Setup Troubleshooting. Cuando aparezca la pantalla Detección de impresora (Printer Detection), haga clic en Siguiente (Next).
Página 38
Macintosh computer. Windows users: read “Information” on page • The alphanumeric characters after Canon MX420 series is the machine’s Bonjour service name or MAC address. • If the machine is not detected, make sure of the following.
Página 39
Mac OS X v.10.4.11 When the Printer List window Click More Printers in the Printer Select Canon IJ Network in the pop-up Make sure that Canon MX420 series appears, click Add. Browser window. menu, select Canon MX420 series in is added to the list of printers.
Página 40
When the Register Printer and Scanner screen Select Canon MX420 series on the Click Next on the Register Printer and Scanner appears, click Register Scanner. Canon IJ Network Scanner Selector screen. EX screen, then click OK. Next, read “Information” on page 39!
Página 41
If the serial number is not displayed on the registration screen, input the number found inside the machine. Si el número de serie no aparece en la pantalla de registro, introduzca el que viene en el interior del equipo. Serial No. * * * * * * * * * Click Next.
Página 42
Solution Menu EX starts. For Macintosh For Macintosh It is necessary to restart the computer before scanning Solution Menu EX starts when clicking OK in the Canon using the Operation Panel on the machine for the first time. Solution Menu EX dialog.
Página 43
Using the Machine from Additional Computers Now that the machine is setup on your wireless/wired connection, you can install the software and drivers on additional computers on the same network. Additional settings are not required. To add computers from which to use the machine, go to “10 Use from Additional Computers” on page 42. Uso del equipo desde ordenadores adicionales Una vez finalizado el proceso de instalación de la conexión inalámbrica/cableada del equipo, se puede instalar el software y los controladores en ordenadores adicionales de la misma red.
If the machine is already connected to a wireless/wired connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica/por cable, se puede utilizar desde otros ordenadores de la misma red. To use from additional computers Computer from which the machine can be used currently Insert the Setup CD-ROM into the computer from which...
To change to a wireless connection from a USB connection, start over from “7 Wireless Setup” on page 25 to set up a wireless connection. Para cambiar a una conexión inalámbrica desde una conexión USB, vuelva a empezar desde “7 Configuración inalámbrica” en la página 25 para configurar una conexión inalámbrica.
Página 46
Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Se instalan varias aplicaciones de software en el ordenador junto con los controladores.
Página 47
Load paper in the Rear Tray (A) in portrait 1. To start Solution Menu EX, click the (Solution Menu EX) icon orientation with the printing side facing up. (For on the desktop (Windows) or on the Dock (Macintosh). details, refer to page 14.) 2.
Página 48
Select a folder containing images, then Click Select Paper, then select the Click Layout/Print, then select a layout Click Print. select an image you want to print. Paper Size and Media Type settings for the image. If you are using Windows, printing will start. that match the loaded paper.
Página 49
Load A4 or Letter-sized Open the Document Cover (B), then place 1. Close the Document Cover. plain paper. (For details, the document face-down and align it with the 2. Press the COPY button (E). refer to page 14.) Alignment Mark (C). The copy standby screen is displayed.
Página 50
Press the FAX button (A). Open the Document Tray (C), then move the Document Guides (D) to both edges. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide.
Página 51
1. Insert the document face-up until a beep sounds. Use the Numeric buttons (E) to enter Press the Black button (F). the fax number. 2. Slide the left and right Document Guides against both ends of the document. The fax is sent. •...
Página 52
Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). 1. Press the Setup button (A). Use the { or } button (C) to select Yes, then press the OK button. 2. Use the [ or ] button (B) to select Wireless LAN setup.
Select Other setup, then press the OK Select WPS, then press the OK button. Select Push button method, then Press the OK button. button. press the OK button. Seleccione Otra configuración (Other Seleccione WPS y, a continuación, pulse Seleccione Método de pulsador (Push Pulse el botón OK.
Página 54
Press and hold the WPS button on the access point (for about When the above screen appears, press the OK button. 5 seconds), then press the OK button on the machine within 2 Next, read “9 Install minutes. the Software (Network •...
5. Vaya a The machine supports “WCN-UFD”. • Canon assumes no responsibility for any damage or loss of data stored on your USB flash drive regardless of the cause even within the warranty period. Next, read “9 Install the Software (Network •...
Página 56
After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required.
Página 57
Wireless LAN: (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard IEEE802.11n/IEEE802.11g/IEEE802.11b *5 chart No.1 for others, both in standard mode or Canon FAX Standard chart Scanning resolution No.1, standard mode.) Optical resolution (horizontal X vertical) max: 1200 X 2400 dpi *1 A computer that complies with Hi-Speed USB standard is required.
Página 58
Windows Vista or Windows XP pre-installed. Temperatura: de 5 a 35 °C (41 a 95 °F) • Windows: Uninstall software bundled with the Canon inkjet printer Humedad: del 10 al 90% (humedad relativa sin condensación) Ancho de banda de frecuencia: 2,4 GHz...
(Basado en el cuadro nº 1 de ITU-T para especificaciones de EE UU y en el Procesador a 300 MHz PowerPC G4, PowerPC G3 cuadro nº 1 del estándar de Canon para el resto, ambos en modo estándar, y en 128 MB 256 MB el cuadro nº...
CL-211 2976B001 CL-211 2976B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon Llame a 1-800-OK-CANON para localizar un distribuidor cercano o visite online store at www.shop.usa.canon.com la tienda en línea Canon en www.shop.usa.canon.com CANON U.S.A. INC.