Peavey 3D Mix Pro Manual Del Usuario página 3

The 3D Mix Pro ª is a two channel, two-mic DJ mixer, with SRS
enlarge the space of the left-right stereo field. Each stereo channel has three-band equalization with
22 dB of cut and 12 dB of boost to allow for creative mixing of different frequency bands. A signal
present LED and a cue switch are provided to check the signal.
The microphone inputs have individual level controls and signal present LEDs. They share a two
band EQ, a 75 Hz low cut filter (non-defeatable), and a mute switch. Phantom power (15 V) is
available to power condenser mics.
If external effects are desired, a music only loop function Ñ enabled by a switch and monitored with
its own cue switch Ñ allows the insertion of external components such as delay, flange, or other
special effects into the music signal path. Built into this path is the SRS system to give a greater
depth to the stereo image. A special ÒcollapseÓ switch toggles the signal from the width set by the
SRS space control to mono, for dramatic spatial effects on the fly.
A cueing feature has been provided to check the status of Channels 1 and 2 and the loop return
before they are routed to the main outputs. This signal drives the headphone and booth outputs. A
headphone pan control and a split switch give the DJ other ways to compare cue and main signals.
In addition to the main servo-balanced (TRS) output, the 3D Mix Pro has unbalanced (phono) and
tape (-10 dB) outputs. A third order, 40 Hz rumble filter can be switched in to keep inaudible, power-
robbing, low frequency energy from the speakers. A dual twelve segment LED display indicates the
main output level. The 3D Mix Pro is powered by an internal power supply.
FEATURES
Two Distinct Stereo Input Channels:
Features per channel
Two selectable stereo inputs
One input selectable to phono or line (rear)
CD/Phono(Line) switch
100 mm smooth operating fader
Three-band active EQ with extreme 22 dB cut
Input gain trim control
Gold-plated RCA connectors
Cue switch w/LED
Signal present LED
Two Microphone Inputs:
Features per input
XLR balanced input jack
Rotary level control
Signal present LED
15 V phantom power
E N G L I S H
ª
3D MIX PRO
3
¨ stereo enhancement circuitry to