Clarity C4205 Guía Del Usario página 22

22
and wait for a second dial tone before you can
dial an outside number. Press the RD/P button
at the required point during the memory storage
process to program a pause.
Temporary Tone
If you have rotary (pulse) dial service, you can
change from pulse to touch tone (tone) during a
call.
1. Make phone call and wait until it is
connected.
2. Press the * key. Keys pressed after this are
sent as tone signals.
3. The phone will automatically reset to rotary
(pulse) service after the call ends.
Lighted Key Pad
The key pad will light for fifteen (15) seconds
after removing the handset from the base. To
reactivate the feature while in standby, press the
TALK or the MEM button. To activate while the
phone is in use, press any key.
Page/Handset Locator
To send a page signal from the base to the hand-
set, press the PAGE button located on the base of
the telephone. A series of rings will sound from
the handset.
To locate the handset if it is away from the base,
press and hold the PAGE button for approximate-
ly five (5) seconds. A series of rings will sound.
Return the handset to the base or press any but-
ton to cancel the page.