Telephone Installation - Clarity C4205 Guía Del Usario

Teléfono inalámbrico de 2.4 ghz
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12
WALL MOUNTING INSTALLATION
CAUTION: Disconnect the telephone line cord
before connecting or disconnecting the battery
backup in the wall mount bracket.
The base unit may be mounted on a standard
wall plate.
1. Plug one end of the supplied short modular
telephone line cord into the TEL jack located
on the back of the base of the phone.
2. Insert the plug of the AC adapter into the
jack marked DC 9V 400mA located on the
back of the telephone base.
3. Align the mounting bracket on the back of
the base so that the black rubber feet are
towards the bottom of the phone. Insert the
bracket's tabs into the slots and secure the
bracket by sliding it upward.
4. Plug the short modular telephone line cord
into the wall plate jack, then align the mount-
ing bracket's keyhole slots with the wall plate
studs and slide the base of the phone down-
ward to secure it on the wall.
5. Plug the adapter into a standard AC power
(electrical) outlet.
6. Press and lift out the handset holder tab, turn
it around so the narrow tab end extends
out and slide back into its slot. This will hold
the handset in the cradle when the phone is
wall mounted.
7. Lift the base's antenna to a vertical position.

Publicidad

Tabla de contenido
loading

Tabla de contenido