Clarity C4205 Guía Del Usario página 27

Phone Will Not Hold Charge:
Make sure the charging contacts on the hand-
•
set and base are free of dust and dirt. Clean
the contacts with a soft cloth.
Make sure CHARGE LED on the base is lit
•
when handset is in the cradle.
If necessary, replace the handset battery. (See
•
Handset Battery Charging)
Difficulty in Placing or Receiving Calls:
Move closer to the base and try again.
•
If moving closer does not work, you may have
•
lost the security code.
Reset code by placing the handset back on
•
the base for 5-10 seconds. (See Security
Code Section)
• Make sure you have selected the correct
dialing mode, tone or pulse.
Make sure the AC Adapter is not plugged into
•
a wall outlet with other appliances. Discon-
nect for 5-10 seconds then reconnect. Place
the handset back on the base and reinsert the
AC Adapter.
Make sure the handset battery is fully charged.
•
27