Technical Data; Table I Potato Heater Hot Container; Installation Instructions; Potato Heater Hot Container Data Plate - MBM MINIMA Serie Manual Del Usuario

Recipiente caliente calentador de patatas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1.
1.1
MINIMA SERIES POTATO HEATER HOT CONTAINER
MODEL
ECC 46
*SUPPLY VOLAGE: 1N 230 V 50/60 Hz
N.B.: the input power with 1N 220 V 50/60 Hz is approximately 9% lower than the figures given
the input power with 1N 240 V 50/60 Hz p circa del 9% higher than the figures given
2.
Installation must be performed by qualified persons in accordance with current regulations.
WARNINGS:
If the unit is installed against a wall, the wall needs to withstand temperatures of 100°C and must be fireproof; if not, it is
essential to install thermal insulation.
Before proceeding with the installation, remove the protective plastic film and eliminate any adhesive residues by means of
a suitable product for cleaning stainless steel.
Install the unit horizontally, correct positioning is obtained by turning the levelling feet.
The various units may be installed separately or combined with other units in the MINIMA range.
- This unit is not suitable for encasing.
2.1
MINIMA SERIES POTATO HEATER HOT CONTAINER DATA PLATE
The technical data plate is on the back of the unit.
MBM BRESCELLO - ITALY
RE37187/1998
V
2.2

LAWS, REGULATIONS AND TECHNICAL DIRECTIVES

The following regulations must be observed during installation:
- Current accident and fire regulations.
- The regulations of the electricity supply company.
- Health regulations.
- Electrical systems standards.
DIMENSIONS in mm
outside
LxDxH/H max
400x600x270/420
400x600x270/420
Mod.
Matr. N°
KW
- 9 -
INPUT
POWER
tank
LxDxH
kW
1

INSTALLATION INSTRUCTIONS

HZ

TECHNICAL DATA

NET
WEIGHT
kg
24
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ecc46

Tabla de contenido