Remington iLIGHT IPL6500 Guía De Uso Y Cuidado página 23

SKIN TONE SENSOR LED
will be blinking orange
2a. Turn the POWER SWITCH on. The
SKIN TONE SENSOR will flash
YELLOW. You will hear a series of
audible "BEEPS" every 5 seconds to
remind you to take the test. For safety
reasons, after 30 seconds of inactivity,
the audible "BEEPS" will increase in
frequency until the test is taken or the
machine is turned off.
Figure 5
2b. Always place the SKIN TONE SENSOR
window directly on the area of skin
you plan to treat. The reading will take
place automatically.
Note: You must use the SKIN TONE
SENSOR to test color on each body part
you plan to treat.
23