Remington iLIGHT IPL6500 Guía De Uso Y Cuidado página 25

Notes:
• Some areas of skin are darker than
others. You must use the SKIN TONE
SENSOR on each different area you
want to treat.
• If you believe your skin is suitable
based on the Skin Tone Chart in
Figure 1, but the SKIN TONE SENSOR
will not enable the device, contact
Customer Service. See page 48.
• If you have tanned skin in the
intended treatment area, DO NOT
use the Remington iLIGHT Ultra
Face & Body device in those areas
as your skin may be too dark for
treatment. You should wait until
your tan has completely faded from
any intended treatment area before
using the device.
STEP 3: SELECT ENERGY LEVEL
ENERGY LEVEL SELECTION DISPLAY
illuminates the energy level that the
Remington iLIGHT Ultra Face & Body
device will deliver to your skin, from the
lowest level (
level (
hair removal results, but may be less
comfortable. To get the best results, you
should use the highest setting that's
comfortable.
There are 5 energy level settings on the
device. Whenever the device is turned
on, it is automatically set to the lowest
energy level and the light will be illumi-
nated on the ENERGY LEVEL SELECTION
DISPLAY. See Table 1. To modify the
energy level, press the ENERGY LEVEL
SELECTION BUTTON to increase the
energy level. Once the energy level has
reached level 5, pressing the ENERGY
LEVEL SELECTION BUTTON will return
the device to energy level 1. The num-
ber of lights on the ENERGY LEVEL
SELECTION DISPLAY will coincide with
the change in energy level. See Table 1.
25
) to the highest
). Higher levels improve