Installation Of The Return Air Duct; Installation Of Wired Controller - Gree GMV-ND56PHS/A-T El Manual Del Propietario

Multi Variable Air Conditioners Duct Type Indoor Unit

4.4.3 Installation of the Return Air Duct

(1) The default installation location of the rectangular flange is at the back and the return air
cover plate is at the bottom, as shown in Fig 4.4.4.
(2) The installation method can be choosen with considering the conditions of the building
and maintenance etc., as shown in Fig 4.4.5.
No.
1
2
3

4.5 Installation of Wired Controller

Please refer to User Manual of Wired Controller for the installation details.
NOTICE! When installation is finished, the unit must be tested and debugged before
operation. Please refer to Instruction Manual of ODU for auto addressing and debugging
details.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Table 5 Installation of the return air duct
Name
Return Air Inlet (with filter)
Return Air Duct
Indoor unit
Fig 4.4.4
Fig 4.4.5
No.
4
5
15
Name
Supply Air Duct
Grille