Eliminating Faults - Festo DGO A-B Serie Instrucciones De Utilizacion

DGO−...−A−B
11 Accessories
Accessories
Driver for compensating for misalignments and
for avoiding tilting torques (for dia. 16...40)
Foot fastening (for dia. 12...25)
Flange fastening (for dia. 12...25)
Flange fastening (for dia. 32, 40)
Proximity switch
Fastening kit for proximity switches
Sockets for proximity switches
One−way flow control valve
Non−return valve with control
Screw connector
Lubricating grease
12

Eliminating faults

Fault
Uneven
movement of
the slide the slide
Slide does not
come into
stroke end stroke end
position
Festo DGO−...−A−B 0410b English
Possible cause
One−way flow control valve not
fitted correctly
Lubrication missing
Cylinder barrel dirty
Cylinder barrel damaged
Adjusting screw of end position
cushioning completely closed
Magnetic coupling is interrupted
Type
FKG−...
HBN−...
FBN−...
FV−...
SMEO−1−... / SMTO−1−... / SMPO−1−...
SMB−1
SIM−M8−...
GRLA−...
HGL−...
QS−...
see chapter 9
Remedy
If possible restrict exhaust
Lubricate
Clean, provide a cover
Consult Festo after−sales service
Open adjusting screw
Press the external slide into the
end position until the internal
slide couples in again against the
magnetic repelling force
29