Optional Installation - Tripp-Lite SmartPro AGSM8207 Serie Manual Del Propietário

Sistemas ups inteligentes, interactivos salida de onda sinusoidal de 120v capacidades 2200va-3000va
Ocultar thumbs Ver también para SmartPro AGSM8207 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Optional Installation

These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
DB9 serial cable (see
communication port on your computer to
the communication port of your UPS. Install
on your computer the Tripp Lite PowerAlert
Software appropriate to your computer's
operating system.
EPO Port Connection
2
This optional feature is only for applications
requiring connection to a facility's
Emergency Power Off (EPO) circuit. When
the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
Using the cable provided, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
18-08-502-933088.indb 7
) or
1A
) to connect the
1B
®
) to a user-supplied
2A
).
2B
7
1A
1B
2A
2B
4-5
9/25/2018 10:49:20 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido