ION TREBLE LP Guia De Inicio Rapido página 5

Features
1. Platter: Place your record here, securing
it to the platter with the plastic cap.
(Loosen the cap by turning it clockwise;
turn it counterclockwise to tighten it.)
2. Tonearm: The fixed tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
3. Arm Clip: This specially designed arm
clip secures the tonearm while at rest or
when not in use.
4. Raise / Lower Lever: Raises and lowers
the tonearm.
5. Bluetooth LED: This LED blinks blue
when pairing with a Bluetooth device.
Once fully paired, the LED will be lit solid
blue. When Treble LP is power on and
Bluetooth is inactive, the LED will be lit
red.
6. Bluetooth Button: Press this button to
start Bluetooth pairing. If after 5 minutes
no Bluetooth speaker can be found to
pair with, the Bluetooth transmitter will
become inactive and the Bluetooth LED
will be lit red. When currently connected
to a Bluetooth device, press this button
to disconnect.
Note: The Treble LP needs to be
powered on for five seconds before it is
capable of Bluetooth Pairing.
7. Power / 33/45 Switch: This switch
powers Treble LP on and off, and
controls the RPM of the turntable platter.
8. Volume: Adjust this to control the audio
output level.
9. Audio Out: Use a standard 1/8" (3.5 mm)
stereo auxiliary cable to connect this
output to an optional external speaker
system for
playback.
10. Power Input: If you prefer to power
Treble LP via wall power instead of the
internal battery, you can connect the
included power adapter to this input,
then connect the adapter to a wall outlet.
11.
Battery Compartment:
compartment is the Lithium Ion battery
that powers the Treble LP when the
power adapter is unplugged. The battery
will charge when the power adapter is
plugged into a wall outlet.
listening to your
In
vinyl
this
5
1
8
10 9
11
4
3
2
6
7
5