Olimpia splendid PELER 4E Instrucciones Para El Uso Y El Mantenimiento página 16

• In NATURE mode, the appliance simulates natural changes in wind strength, with
LOW, MEDIUM or HIGH intensity.
• In SLEEP mode, the appliance simulates natural changes in wind strength as in
nature mode, but every 30 minutes the appliance switches to a lower intensity level
until it reaches LOW intensity. Once it reaches LOW intensity level, the appliance
stays at this level until it is switched off by the user.
3b- SPEED button
Press this key in working state, making a Bi-sound, to set up the fan speed. The fan speed
follows the order: low—mid—high—Low—mid......, the indicator lights up accordingly.
The product turns on at low speed by default.
3c- Oscillation button
Press the Oscillation button to turn oscillation function on or off.
3d- TIMER button
When the appliance is functioning, press the TIMER button to set the turning off delay.
At every pressure it is possible to select 1, 2 or 4 hours.
To cancel the timer mode, press the TIMER button repetitively until the selections 1, 2
and 4 hours are turned off.
3e- COOL button
1. Press COOL button. The COOL indicator will be on and the pump starts to work.
2. After about 3 minutes, the comfortable cool wind with moisture comes out.
3. Press it again to shut off. The COOL indicator turns off then fresh and dry wind
comes out.
NOTES:
1. If the COOL button is pressed when water is below the lower level or if it is
absent, no alarm or signal is present if the pump keeps functioning. In this
case the pump could emit an abnormal noise and it is advised to turn off the
cooler function.
2. The unit can be used without water as normal electrical fan. In this situation,
please keep the COOL button in OFF mode.
EN - 8