Descargar Imprimir esta página

Tripp-Lite WorkWise Manual Del Propietário página 6

Escritorio de altura ajustable

Publicidad

Assembly
Available separately, WorkWise desk tops include fasteners (10-24 x 5/8" Phillips pan head) and contain preinstalled
threaded inserts for easy assembly. Do NOT use power tools to attach the WorkWise desk top to the WorkWise desk base
and do NOT overtighten or force supplied screws into the WorkWise desk top's threaded inserts. For non-WorkWise desk
tops, fasteners are included
6
Lay the WorkWise desk top flat so that the threaded inserts are facing upward (the mounting holes on the Side Brackets and Frame
Ends should align with the desk top's threaded inserts). Attach the desk base to the desk top using the hardware included with the
WorkWise desk top.
Once the desk base is attached to the desk top, align the Handset
the WorkWise desk top. Use two (2) M5 x 16 Wood Screws
Note: For non-WorkWise desk tops, the handset may be placed anywhere along the front edge of the desk top, but it is recommended it be placed
toward an end so it does not interfere with the chair when seated.
M
, which may or may not be suitable for installation.
Desk Top
Mounting
Location
N
H
with the predrilled pilot holes located at the left or right ends of
H
to attach the handset.
N
Desk Top
Mounting
Location
6
Desk Top
Mounting
Location

Publicidad

Capítulos

loading