Hayward OPTIMA pH/ORP NEXT Serie Manual De Instalación página 13

Paragraph 10 – Flow Alarm
Programming
+
PROG
Config.
Alarms
Flow
Paragraph 11 – Level Alarm
Programming
+
PROG
Config.
Alarms
Level
Paragraph 12 – Flow Rate Measurement Unit Display
Programming
+
PROG
Config.
Unit
Standard
EM00136321
Flow
Off
Flow
On
Signals
6
Alarms
Flow
Level
Stop
Level
Alarm
Alarms
Level
Unit
Standard
Unit
Gph
Unit
ml/m
Unit
L/h
Allows you to activate (deactivate) the flow sensor.
Once activated (On) by pressing the
the number of signals the pump requires before starting the
alarm. Press
to set the value. Press
return to the main menu.
Allows you to set the pump for the level alarm activation,
with dosage operation interruption (Stop), or simple
activation of the alarm signal without dosage operation
interruption.
Press to access the item then press
alarm type. Press
the main menu.
Allows you to set the measurement unit of the displayed
dosage.
Press to access the item, then press
type of unit, L/h (Liter/hour), Gph (Gallons/hour), mL/m
(milliliters/minute) or standard (% or frequency, according to
the settings). Press
menu.
rev.2.0 EN
Operation
and the number will start to flash; press
to confirm. Press
Operation
to confirm. Press
Operation
to confirm and return to the main
key, you can set
to
to set the
to return to
to set the
11