Philips HQ8290CC Manual Del Usuario página 15

4222.002.4998.2.indd 17
When the cleaning chamber is filled with
cleaning fluid, do not move it to prevent leakage of
cleaning fluid.
5 Put the small plug in the Jet Clean System and
put the adapter in the wall socket.
,
The holder automatically moves to the highest
position.
The Jet Clean System is now ready for use.
Using the Jet Clean System
1 Place the shaver upside down in the holder and
push the lever down completely to lock the
shaver into place.
,
The battery symbol on the Jet Clean System
goes on to indicate that the shaver is being
charged.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
2 Press the on/off button on the Jet Clean
System to start the cleaning program.
The cleaning program has two phases, the cleaning
and drying phase.
,
The battery symbol on the Jet Clean System
goes out.
,
During the first phase of the cleaning program,
the cleaning symbol starts to flash and the
shaver is automatically lowered into the cleaning
fluid.
,
The shaver automatically switches on and off
several times and moves up and down.
,
The cleaning symbol flashes throughout the
cleaning program, which takes 8 minutes.
ENGLISH
17
27-02-2009 11:34:20