Conceptronic C54PSERVUM Manual De Usuario página 20

ENGLISH
6. MFP Server Control Panel
When the hardware and software installation is finished, you can proceed with the
configuration of the C54PSERVUM.
The MFP Control Panel software will automatically start when your computer is starting, and
can be recognized by the red Conceptronic icon in the system tray.
Open the MF Printer Server Control Panel with the shortcut on the desktop, through the
shortcut in the Start Menu or by clicking the red Conceptronic icon in the system tray.
The MFP Server Control Panel will appear on your screen, listing the available Multifunctional
Printer Servers in your network:
If the C54PSERVUM is not listed in the MFP Server Control Panel, click the "Refresh Server
List" button to scan again for MF Printer Servers in your network.
When the C54PSERVUM is connected to a network with an available DHCP Server (like a
router), it will receive an IP address in your network range automatically.
20