Conceptronic C54PSERVUM Manual De Usuario página 23

ENGLISH
Wireless Configuration
In the Wireless Configuration, you can configure the Wireless MF Printer Server to connect
wireless to your existing wireless network.
You can change the following settings:
Region or Domain:
Network Type:
SSID:
Channel No:
Security System:
After changing the Wireless Configuration, click "Apply" to save the settings.
User Accounts
In the User Accounts Configuration, you can change the administrator username and
password.
You can set a new Administrator login at the field "New Administrator".
You can set a new Administrator password at the field "New Password".
When you set a new password, you need to retype it in the field " Retype Password".
When the administrator account is changed, click the "Set" button to save the settings.
When the configuration of the C54PSERVUM is complete, you can exit the configuration
pages.
Note: The C54PSERVUM has more settings than the described basic settings. These
settings are for experienced users and not described in this manual.
Set your Region.
Select between Infrastructure or Ad-Hoc.
When you want to add the C54PSERVUM to your existing wireless
network, select Infrastructure. If you want to make a point-to-
point connection to a client, select Ad-Hoc.
Enter the SSID of your existing wireless Infrastructure, or a new
SSID name for your Ad-Hoc wireless network.
Set the channel of your wireless network (Ad-Hoc only!).
Enable or Disable the wireless security of the C54PSERVUM.
You can select between WEP 64Bit, WEP128Bit or WPA-PSK.
Note: When you use an Ad-Hoc configuration, WPA-PSK is not
available.
23