Conceptronic C54PSERVUM Manual De Usuario página 25

ENGLISH
6.3 Existing printer installation
If you have your printer already installed on your computer, it is not necessary to install the
software again. The MFP Server Control Panel and Windows can easily adapt your existing
installed printer to a network printer.
A. Follow the steps in Chapter 5.1 to connect the printer and the MF Printer Server to the
network.
B.
Open the MFP Server Control Panel by clicking on the system tray icon.
C. Select the printer connected to the C54PSERVUM and click the "Connect" button.
Your computer will recognize the printer as "normal" USB printer and assigns the existing
drivers and software to the network printer.
After the "New Hardware" detection and installation by Windows, your printer is installed as
network printer and ready to use.
Note: You need to click the "Disconnect" button before you can install the printer on
another computer.
25