Conceptronic C54PSERVUM Manual De Usuario página 21

ENGLISH
If you are using static IP addresses, and there is no DHCP Server, the C54PSERVUM will
operate on the factory default IP Address: 192.168.0.55.
You can easily see if the C54PSERVUM is in your network range by the colour of the text.
When the C54PSERVUM is isted in Green, they are in the wrong network range.
When the C54PSERVUM is listed in Blue, they are in the correct network range.
6.1 Basic C54PSERVUM configuration
Before you can use the C54PSERVUM, you need to change the basic configuration.
A.
Select the C54PSERVUM in the MFP Server Control Panel and click the "Configure
Server" button.
B. The C54PSERVUM will ask for a username and password. Enter the username and
password and click "Login".
Note: The default username is: "admin".
The default password is: "admin".
21