Conceptronic C54PSERVUM Manual De Usuario página 24

ENGLISH
6.2 New printer installation
When the C54PSERVUM is configured, you can install the printer on your computer.
Note: It is advised to make a new printer installation on your computer. If you want to
keep the existing installation and adjust the existing installation to the
C54PSERVUM, please continue to Chapter 6.3.
A. Insert the CD-ROM of your printer in your CD-ROM Drive. The Autorun should appear
automatically. If the Autorun menu does not appear, navigate to "My Computer" and
double-click on the CD-ROM drive to start the Autorun menu.
B. Install the printer through the CD-ROM of your printer.
During installation of the software and drivers of your printer, most installation software will
ask you to connect the printer to the computer.
C. Open the MFP Server Control Panel by clicking on the system tray icon.
D.
Select the printer connected to the C54PSERVUM and click the "Connect" button.
Your computer will recognize the printer as "normal" USB printer and the software of your
printer will continue the installation.
After the software installation is finished, your printer is installed as network printer and
ready to use.
Note: You need to click the "Disconnect" button before you can install the printer on
another computer.
24