INSTALL OVEN
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1. Using 2 or more people, lift the oven partially into the cabinet cutout. Use the
oven opening as an area to grip.
NOTE: Push against seal area of the oven front frame when pushing the oven
into the cabinet. Do not push against the outside edges.
2. Push the oven completely into the cabinet until the back surface of the front
frame touches the front wall of the cabinet. Center the oven within the cabinet
cutout.
NOTE: With the oven door open, you will see 2 holes on each side of the front
frame of the oven door opening.
3. Drill 1/8" pilot holes, through the 4 holes in the front frame and into the front wall
of the cabinet.
4. Using the 4 screws (provided), install the oven to the cabinet. Replace the oven
racks.
5. Reconnect power to the oven.
10
WARNING
Excessive Weight Hazard
a
a
Holes
b
Seal Area of Oven
b
a