Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8. Shims
The Pronto!™ floor drain comes equipped with two plastic leveling shims. These
may be used when the finished drain assembly is slightly tilted.
Leveling Shims
On-Grade Slab Installation
It is recommended to use a bead of silicone around the last thread of the top
assembly. Screw the top assembly down until the bottom of the frame is flush with
the concrete. Use a bead of silicone around the perimeter of the strainer frame.
Gently turn the head clockwise until the top of the strainer sits flush with the finish
floor.
Cleaning & Maintaining Pronto!™ Floor Drain
Pronto!™ floor drains should be inspected periodically to ensure maximum
performance. If drain becomes clogged with dirt and debris, it will significantly lower
the amount of water that flows into and through the drain.
Maintenance
First remove the three screws that hold the strainer in place. Lift strainer off and lay
aside. Grip the top adjustable strainer shank and screw it up and out of the drain.
Lay aside. The shank may need to be wiped down if the sides come in contact with
dirt and debris. Use gloved hands or tools to remove any dirt and debris that may
have entered or clogged the drain body. Flush drain with water to make sure that
is working properly. Screw the strainer shank back into the drain body and adjust
to correct height. Petroleum jelly may be used around the shank for easing the
process. Apply the top strainer and insert screws.
7
Publicidad
Tabla de contenido
