Final Assembly; Configuration Menu - Metra 99-5853CH Instrucciones De Instalación

FINAL ASSEMBLY

1. Slide the radio into the dash. Before doing so, remove a module from the sub-dash
prohibiting the radio from sliding in, then relocate it downward. The mounting brackets
attached to the module will need to be bent outward to make room for the radio.
2. Secure the completed assembly to the dash using the factory screws, then reassemble the
dash in reverse order of disassembly using the 99-5853CH radio trim panel.

CONFIGURATION MENU

The buttons on the steering wheel will be used to enter, navigate, and make changes to the
menu. The display on the climate knobs will be used to view the menu.
1. With the driver's door open, press and hold the  button, then cycle the key on.
2. Press the Track Up and Track Down buttons to toggle through the menu options available.
Refer to the Menu Options table for a list of options, and description of each option.
3. Press the Volume Up and Volume Down buttons to toggle through the sub-menu options
available. Refer to the appropriate Sub-Menu Options table for the item in interest.
4. Once an item has been chosen to change, press the  button.
5. Navigate to "d o", then press the  button to exit the Configuration Menu.
6. If no activity after 10-seconds the Configuration Menu will close.
Menu Options
Right Knob Display
Left Knob Display
A.G
r.d
Will display current state
b.L
U O
d o
Description
OEM Amplifier Gain
Radio Detection
Backlight
Version Number of Kit
n E Done / Quit
Continued on the next page
REV. 11/16/2020 INST99-5853CH
9