auna NR-620 DAB Manual Del Usario página 40

EN
40
3. After finish of recoding, press the "Stop" button (12) once to terminate
the recording
Remarks:
- The recording speed is 1:1 and according to the actual playing time of
the Phono or Tape.
- During CD recording, the recording process is on 1:1 scale and the unit
will playback the song(s) during recording.
- During MP3 disc recording, it's a copy mode meaning the system will
copy the MP3 file only and will not playback the songs.
- The system will create a " RIP " folder for encoding from CD ;
"FROMCD" folder for encoding from CD-MP3 disc ; "REC" folder for
encoding from Phono/cassette/radio.
- The recording format is preset at – MP3 bit rate : 128 kbps, sampling
rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recording, press the " Stop " button again during record
mode.
- Encoding CD or MP3 file to USB will be successful only entire song
being encoded or copied, if terminate the encoding or copying process
intermediately, there is no track being recorded nor stored to the USB.
File delete at USB (by remote control)
The system is able to erase the file stored inside the USB pen drive by
following:-
A) Single file delete
1. Select at " USB " mode.
2. Press the " Delete " button on the remote control and the LCD display
will show (DEL -T001).
3. Press skip forward  or skip backward  button to select the file
going to be deleted.
4. Press the " Delete " button to enter " YES / NO " mode and then press
Skip forward  or Skip backward  to select " YES " or " NO ".
5. Press the "Delete " button again to confirm the setting.
B) All files delete
1. Select at " USB " mode.
2. Press and hold the " Delete " button on the remote control for 2-3
seconds and the LCD display will show (DEL - A)
3. Press the " Delete " button again to enter " YES / NO " mode and then
press Skip forward or Skip backward to select " YES " or " NO ".