Disposal; Troubleshooting - Silvercrest SECM 12 C6 Instrucciones De Servicio

9. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

10. Troubleshooting

If your appliance fails to function as re-
quired, please try this checklist first. Perhaps
there is only a minor problem which you can
solve yourself.
DANGER!
Risk of electrocution!
Do not attempt to repair the appliance
yourself under any circumstances.
Fault
No function. Is the power plug 9 proper-
ly inserted?
Ice crystals Dry the bowl 6 completely
on the before freezing and place
bowl 6 in a freezer bag.
The ice The mix has worked up-
cream wells wards. Use a smaller quan-
up out of the tity of mix next time.
opening in
the bowl.
The ice Were the bowl 6 and mix
cream has re- cold enough? The bowl 6
mained too has to be cooled in the
liquid. freezer for 24 hours and
the mix for 4 hours in the re-
frigerator.
Freeze the soft ice cream
mix in the freezer for a
while.
The appli- The overheating protection
ance switches has probably tripped. Un-
itself off. plug 9 and wait for the mo-
tor unit 2 to cool down -
min. 15 minutes.
Possible causes /
Action
GB
39