Entering Personal Data; Performing Body Analysis - ADE BA 1807 Instrucciones De Operación

Entering personal data

1. Briefly step onto the weighing surface once, using a little force.
"0.0" and the set unit of measurement, e.g. "kg", will be shown on the display.
2. Press SET.
On the display, a flashing memory cell number will be shown.
3. Using the or the
4. Press SET.
Using the or the
5. Press SET.
On the display, the preset value for age (preset: 25) will flash.
6. Using the or the
7. Press SET.
On the display, the preset value for height (e.g. "165" for cm) will flash.
8. Using the or the
9. Finally, press SET. You have thus input the necessary data.
The display will now briefly show all input data in succession.
If you would like to have your first body analysis done, wait a few seconds until "0.0"
appears on the display (see next chapter).
If you do nothing else, the scales will automatically switch off after a few seconds.
Entered data can only be overwritten by making a new entry.

Performing body analysis

‚ Body analysis is only possible if your data has been entered (see previ-
ous chapter).
‚ See the chapter "Weighing Tips".
1. Briefly step onto the weighing surface once, using a little force.
"0.0" and the set unit of measurement, e.g. "kg", will be shown on the display.
2. Briefly press SET.
3. Using the or the
your personal body data.
The data is briefly displayed, then "0.0" and the selected unit of measurement, e.g.
"kg".
Body Analyser Scales BA 1807
button, select the desired memory cell.
button, choose your sex: for male, or for female.
button, enter your age.
button, enter your height.
button, select the memory cell in which you have recorded
Entering personal data
23