Hamilton Beach Commercial CPM800 Serie Manual De Operación página 3

26. Remove attachments from mixer before
washing.
27. Do not operate mixer without bowl
guard in position. Do not attempt to
bypass the interlock bowl guard magnet
sensor.
28. UK ONLY: If fitted with a non-rewirable
U.K. plug, a 13-amp B.S. 1362 ASTA
approved fuse must be used. If you
need a replacement fuse carrier, it must
be replaced with on that has the same
colour code and markings. Fuse covers
and carriers can be obtained from
approved service agents.
This equipment is intended for professional use and should be used by trained and qualified personnel only.
wWARNING
Electric Shock Hazard
Plug into an earthed socket.
Do not remove the earthing
connections and plug.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electric shock.
Noise Level
The equivalent continuous sound level when
equipment is operating at maximum speed with no
load is less than 75 dB(A).
The complete CE declaration of conformity documentation for this appliance is available in the
Technical Support section of our website www.hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this stand mixer signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact on the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.
SAVE THESE INSTRUCTIONS
Electric Shock Hazard
Disconnect the cord from
the socket before cleaning or
servicing the machine. Failure
to follow these instructions can
result in death or electric shock.
29. CAUTION! In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
30. WARNING! Flashing light indicates
ready to operate. Avoid any contact
with mixing attachments that may start
unexpectedly.
wWARNING
Cutting and Crushing Hazard
Do not place fingers in the hinge area.
Disconnect the cord from the socket
before inserting/replacing attachments
and servicing the machine.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
Pinching Hazard
Do not place fingers in the hinge area.
3