Base Station - ADE WS 1601 Guía Rápida

Estación meteorológica con sensor inalámbrico exterior
Ocultar thumbs Ver también para WS 1601:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
2. Insert 2 batteries of type LR03
(AAA)/1.5 V as depicted on the bot-
tom of the battery compartment. Pay
attention to the correct polarity of the
batteries (+/-).
3. Slide the battery compartment
cover back into place on the outdoor
sensor.

Base station

You can operate the wireless weather
station with the mains adaptor or with
batteries. If the wireless weather station is
connected to a mains socket, then it oper-
ates via mains power, even when the bat-
teries are inserted in the device. Remove
discharged batteries from the battery
compartment, since they can leak.
Current mode
1. Insert the plug of the supplied mains
adaptor into the connection socket of
the base station.
2. Plug the mains adaptor into a socket
that has a voltage corresponding to
that described under "Technical Data".
Weather Station with Wireless Outdoor
Sensor WS 1601
NOTE on material damage
‚ For operation via mains
power, use only the mains
adaptor delivered with
the weather station.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido