Leveling The Dryer - KENMORE ELITE 796.6142 Manual De Uso Y Cuidado

LEVELING THE DRYER
WARNING:
To reduce the risk of injury to persons, adhere to all
industry recommended safety procedures including
the use of long sleeved gloves and safety glasses.
Failure to follow th_s warning can cause serious injury
or death.
• The appliances are heavy. Two or more people are
required when installing the dryer. Failure to follow
this warning can cause serious injury or death.
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize vibration,
noiset and unwanted movement, the floor must be a
leveln solid surface.
NOTE: Adjust the teve]ing feet onry as far as necessary
to level the dryer. Extending the leveling feet more than
necessary can cause the dryer to vibrate.
0 Use a wrench to turn the leveling feet. Turn the
leveling foot clockwise to raise the dryer; turn the
foot counterclockwise to lower the dryer. Using a
leveb adjust the feet until the dryer is level from side
to side and front to back. Make sure all four feet
are in firm contact with the floor.
NOTE: if you are installing the dryer on the optional
pedestal, the dryer leveling feet should be fully retracted.
Use the leveling feet on the pedestal to level the dryer.
Leveting Feet
Position the dryer in the final location. Place a level
across the top of the dryer.
Aft four leveling feet must rest solidly on the floor.
Gently push on the top corners of the dryer to make
sure that the dryer does not rock from corner to corner.
17