Vornado AC500 Manual Del Usuario página 15

4. Remove and discard the Filters you wish to replace. To re-
move the Carbon Filter, take hold of the Filter at any place
along the perimeter and remove. Repeat on the second
Filter. To remove the HEPA Filter, after the Carbon Filters
have been removed, take hold of the tab (Figure 1) and pull
to release. Repeat on the second Filter. Replace with genu-
ine Vornado Filters. Place the Filters in the unit and gently
press around the perimeter of the Filter to ensure secure
placement (Figure 2).
Note: The HEPA Filters must be placed in the unit before the
Carbon Filters. See Product Information for a detailed illustration.
Fig. 1
Fig. 2
Filter Replacement
5. Replace the Plastic Support Filter Frame by securing the
bottom 2 tabs into bottom slots (B). Slightly flex the Plastic
Support Filter Frame to secure the top 2 tabs into the top
slots (A).
A
B
A
A
²
B
B
A
A
²
B
B
English 15