Tuning To A Reference Tone (Sound Out Mode) - Korg TM-50 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

pitch is sharp.
If you want to tune a just major third above
or a minor third above a certain note, use
the " " (-13.7 cent) or " " (+15.6 cent)
marks on the meter.
Tuning to a just major third above or
a minor third above
If you want to tune to a just major third
above A (0 cent), tune your instrument so
that the note name indicator shows C and
the meter is at " ".
If you want to tune to a minor third above
A (0 cent), tune your instrument so that
the note name indicator shows C and the
meter is at " ".
Tuning to a reference tone (Sound
Out mode)
1.
Press the TUNER ON button.
You will enter the Meter mode.
2.
Press the SOUND button to select Sound
Out mode.
The reference tone is output from the
PHONES jack or speakers. Use the vol-
ume control to adjust the output volume.
3.
Press the CALIB/NOTE p or q button
to select the note.
The output reference tone changes as fol-
lows.
C(C3) n C ♯ n D n E♭ n E n F n F ♯ n G n G ♯
n A n B♭ n B n C(C4) ... C(C6) n C(C3)...
This setting is stored even when the
power is off.
4.
Tune the instrument according to the
reference tone.
5.
Press the SOUND button again to return
to the Meter mode.
If connected to either the INPUT jack or
the PHONES jack, the Meter mode will
11

Publicidad

Tabla de contenido
loading

Tabla de contenido