Pre-Start Checks; Start And Stop Procedure - Altrad Belle BHB BREAKERS Manual Del Operador

GB
A used machine must be treated and disposed of in such a way that the greatest possible portion of the
NOTE:-
Before a used machine is scrapped, it must be emptied and cleaned from all hydraulic oil. Remaining
hydraulic oil must be deposited.
GB

Pre-Start Checks

The following checks should be made each time you start to use the breaker. All these checks concern the serviceability of the breaker.
Some concern your safety:
• Clean all Decals. Replace any that are missing or cannot be read. These can be ordered from the Spare Parts list.
• Inspect the hoses generally for signs of damage.
• Inspect the working tool for wear and damage.
• Do not use an excessively worn or damaged tool.
• Connect the tool.
• Ensure that the hydraulic couplings are clean and fully serviceable.
•
the breaker is connected to the power source.
• Ensure that any power source you plan to use is compatible with the breaker model used (see the "Technical data" section).
GB
Starting
Stopping
Environment
Pre-Start Checks

Start and Stop Procedure

24