Altrad Belle BHB BREAKERS Manual Del Operador página 39

To reduce the risk of serious injury or death to yourself or others, before operating the machine, read the Safety instructions section
found on the previous pages of this booklet.
Design and Function
The Altrad Belle BHB Range of handheld Hydraulic Breakers are sturdy and reliable breakers designed for working together with Altrad
Belle Hydraulic Power Packs.
Breakers are designed for various jobs from light brickwork and asphalt jobs to heavy duty jobs in reinforced concrete.
connection to the Altrad Belle Hydraulic Power Packs.
Choosing the correct hydraulic breaker for a task
It is important to choose the correct size of hydraulic breaker for the work to be performed.
A hydraulic breaker that is too small means that the work will take longer.
A breaker that is too big means that there must be frequent repositioning, which is unnecessarily tiring for the operator.
A simple rule for choosing the correct size of hydraulic breaker is that a normal sized piece of broken material should be removed from
• If it takes less than 10 seconds a smaller hydraulic breaker should be selected.
• If it takes more than 20 seconds a larger hydraulic breaker should be selected.
Installation
Hoses
Quick-release couplings
Fitting and Removing the Breaker 'Steel'
start/stop device. Disconnect the machine from the power source.
'Steel'
'Steel'
Operating Instructions
'Steel', the following instructions must be observed:
Checking for wear
2
Using a working tool with a worn out shank leads to increased machine
vibrations. To avoid increased vibrations, check the shank for wear before the working
Use the checking gauge that corresponds to the working tool's shank dimension. If the
shank is worn out and the working tool should be replaced.
Note:- The Checking Gauge is not supplied with the machine.
'Steel' in the breaker
39
A
B
C
C