Additional Information - KlipXtreme Pulse KHS-628 Guía De Instalación Rápida

7. If you have a lower Bluetooth® version, you may be prompted to enter the
passkey 0000 (4 zeros).
8. If pairing is successful, a tone will be heard and the LED will turn solid blue. If
after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
9.
The headset will automatically shut off after a short period of inactivity to save
battery power.
Using the wireless headset
1. Answering and ending a call using your mobile phone
When there is an incoming call, briefly press the Handset /
•
it up. You may also press the answer button on your cellular phone to take
the call.
To end a call, simply press the Handset /
•
may also finish the call directly using the end key on your cell phone.
To reject or ignore an incoming call, press and hold the Handset /
•
button for about 2 to 3 seconds.
If you want to redial the last number called, quickly press the Handset /
•
button twice.
2. Music playback
Briefly press the Handset / button to start and stop music.
•
When listening to music using your mobile phone, playback will pause to
•
allow the call to go through.
As soon as you hang up, music playback will resume automatically.
•
button to pick
button once again. Likewise, you
Product specifications:
MPN
Headphone
Form factor
Driver unit
Maximum power output
Frequency
Impedance
Sensitivity
Signal to noise ratio
Microphone
Type
Directivity
Frequency
Impedance
Sensitivity
Connectivity
Connection type
Wireless RF frequency
Wireless range
Battery
Type
Charging time
Run time
Standby time

Additional information

Dimensions
Weight
Cable length
Warranty
KHS-628
On-ear
40mm
20mW
20Hz-20,000Hz
32 ± 15%
105 ± 3dB/mW (S.P.L. at 1kHz)
>58dB
Built-in on headset
Omnidirectional
100Hz-18,000Hz
2.2k
105dB at 1kHz
Wireless and 3.5mm
2.402-2.480GHz
33ft
Rechargeable 300mAh lithium polymer cell
2 hours
8.5 hours at medium volume
25 hours
7.3x2.9x7.1in
7.2oz
3.5mm to 3.5mm cable: 47in
Charging cable: 11.8in
One year