Samsung SIR-TS360 Manual Del Propietário página 19

3
3
CHAPTER 3
Setting up and connecting
(Optional) connect your VCR.
8
To connect your VCR to your DIRECTV
S-Video jack for video with the A/V audio jack for audio
A/V jacks for both audio and video
Choose the best quality connection that is supported by your VCR (and that you did not
already use to connect your TV). The S-Video jack provides the highest quality video for your
VCR connection. The A/V jacks provide the next best video quality and high quality audio for
your VCR.
Whichever connection you choose, connect one end of the audio and video cables
to the appropriate OUT jack(s) on your DIRECTV
end of the audio and video cable(s) to the audio and video inputs on your VCR.
Finally, connect your VCR to your TV by connecting audio and video output jacks on
your VCR to available audio and video input jacks on your TV.
NOTE
If you use the OPTICAL DIGITAL AUDIO OUT jack, remove the protective plug from the jack
before making connections. RGB, Component, DVI and S-Video jacks do not output audio.
VCR
34
® HD Receiver, you can use
HD Receiver. Connect the other
®
3
3
CHAPTER 3
Setting up and connecting
If you connected your TV using RGB/DVI or YP
9
select RGB/DVI or YP P output mode.
B R
(Optional) follow the instructions on the next page if you have a VCR and
10
want to hook up the VCR control.
Plug in the power cords for your TV, A/V receiver, and DIRECTV
11
Setting your TV input button
To view any of the programming from your DIRECTV
off-air), set your TV to display the input from the video input jack you used to connect the
DIRECTV ® HD Receiver. (This is a setting on your TV usually controlled by a Video, Input,
or Mode button. See your TV manual for help.)
Also, if necessary, set your A/V receiver to play the audio from the audio input jack you
used to make the audio connection. See your A/V receiver manual for help.
Connecting the RF remote cable with RF receiver.
You can operate the Digital Satellite Receiver when installed in a cabinet or from another
room in your house using the RF remote control. (Optional)
Connect the RF Receiver to the RF REMOTE jack of the Digital Satellite Receiver.
1
NOTE
The operating range of the remote control is about 100 feet when connecting the RF receiver.
This may decrease due to ambient reception conditions, weak batteries, obstacle, etc...
P output, press the output mode button to
B R
HD Receiver.
®
® HD Receiver (satellite, cable, or
35