DeWalt DW744 Manual De Instrucciones página 14

FIG. 29
a) Unplug the saw.
b) Turn the saw on its side, so the bottom, open part of
the unit is accessible.
c) Clean and lubricate the height adjustment screws
threads on the underside of your saw with general
purpose grease, shown in Figure 29.
Accessories
WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
E
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D WALT, recommended
E
accessories should be used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local service center. If
you need any assistance in locating any accessory, please
contact D WALT Industrial Tool Co., 701 East Joppa Road,
E
Baltimore, MD 21286, call 1-800-4-D WALT (1-800-433-
E
9258) or visit our website www.dewalt.com.
Repairs
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (including brush inspection
and replacement) should be performed by a D
tory service center, a D WALT authorized service center
E
or other qualified service personnel. Always use identical
replacement parts.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to
E
faulty materials or workmanship for three years from the
date of purchase. This warranty does not cover part failure
due to normal wear or tool abuse. For further detail of war-
ranty coverage and warranty repair information, visit www.
dewalt.com or call 1-800-4-D WALT (1-800-433-9258). This
E
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D
our:
1 YEAR FREE SERVICE
HEIGHT D WALT will maintain the tool and replace worn parts
E
ADJUSTMENT
caused by normal use, for free, any time during the first year
THREADS
after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your D WALT Power Tool, Laser, or Nailer for any reason,
E
you can return it within 90 days from the date of purchase
with a receipt for a full refund – no questions asked.
FIG. 30
WALT fac-
E
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained either
in the packaging, call the local company or see website for
WALT tools are covered by
E
warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning
labels (Fig. 30) become illegible or are missing, call 1-800-
4-D WALT for a free replacement.
E
12