HQ-Power VDPDMXC146 Manual De Instrucciones página 5

1. Power input
2. MIDI THRU
3. MIDI OUT
4. MIDI IN
5. DMX OUT
6. DMX POLARITY : select the polarity of the DMX OUT
7. AUDIO INPUT
8. REMOTE
c) Connections
The manufacturer is not responsible for damage caused by improper connections.
Connect the supplied adapter with the DC jack and connect the other end with a mains outlet.
Plug the XLR cable into the VDPDMXC146 and connect the other end with the first device you
wish to control.
Plug the MIDI cables into the appropriate MIDI sockets.
5. Operating Instructions
A) Programming
1) Leaving the Recording Mode
• Hold the RECORD button.
• Press the REC EXIT button.
• Release the RECORD button.
The red LED indicator above the RECORD key is now dimmed, meaning that the programming
mode has been deactivated and cannot be accessed.
2) Activating the Recording M
• Hold the RECORD button.
• Press the following flash keys in PRESET A : 1-5-6-8
• Release the RECORD button.
The red LED indicator above the RECORD key is now lit, meaning that the programming mode
has been activated and can be accessed.
3) Erasing all Programmes
• Hold the RECORD button.
• Press the following flash keys in PRESET A : 1-3-2-3.
• Release the RECORD button.
4) Clearing the Memory
• Hold the RECORD button.
• Press the REC CLEAR button.
• Release both buttons.
VDPDMXC146
: 12-20Vdc / 500mA
: used to transmit MIDI data received on the MIDI IN connector
: 3-pin female XLR
: RCA (cinch) line in : 100mV, 1Vp-p
: FULL ON and BLACKOUT can be controlled from a distance using
a ¼" stereo jack (6.35mm)
5 VELLEMAN