21. Attach Table Top Assembly to Base Assembly as shown
in Figure 10. Pivot Strut Tubes (#17) up as shown;
then, with at least one adult on each side of Table Top,
lift top and align ends of U-support tube (#21) with
tops of Strut Tubes (#17) on Caster Beams (#8) as
shown in Figure 10. Slide tubes together.
DO NOT OPEN THE TABLE TO PLAYING POSITION
UNTIL BOTH TOPS ARE INSTALLED! DO NOT LEAVE
TABLE STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS BODILY INJURY
OR PROPERTY DAMAGE.
Table Top
Assembly
With at least 2 adults,
slide Table Top Assembly
onto Strut Tubes (#17).
Figure 10
17
Strut Tube
8
10
AT LEAST TWO (2) ADULTS ARE NEEDED TO
COMPLETE THE REST OF THIS ASSEMBLY! WHEN
ASSEMBLING TOPS TO BASE, HANDLE TOP
ASSEMBLIES BY GRASPING ONLY THE TOPS
THEMSELVES. DO NOT GRASP METAL LEGS, U-
SUPPORT, LINKAGE, OR HINGES. THESE PARTS
CAN MOVE AND COULD PINCH FINGERS OR
HANDS CAUSING SERIOUS INJURY! ASSEMBLE
AS SHOWN WITH LEGS FULLY CLOSED AND
TOPS IN A VERTICAL POSITION. DO NOT OPEN
LEGS AND TR
Y TO ASSEMBLE. TABLE TOPS ARE
HEAVY -
HEAVY -
DO NOT ATTEMPT TO ASSEMBLE
ALONE!
21
U-Support
17
Strut Tube
PIVOT STRUT
TUBES UP
8