MSA V-GARD Manual Del Operador página 10

Helmet shell
V-Gard
V-Gard 200
V-Gard 500
V-Gard 520
ThermalGard
*In addition to the storage time
• MSA recommends writing the date of first use onto a sticker (supplied
with each box of 20 helmets) and then sticking into the shell. This is
normally the point at which service life starts.
• Suspension (Push-Key and Fas-Trac III): replace when damaged or
contaminated , or as required for hygienic reasons
• For EN 50365 class 0 helmets: recommended storage temperature
20 ±15 °C to ensure performance
Accessories / Options
A full range of accessories are available from your local MSA partners:
• Faceshields, eye protection, Hearing protection (muffs)
• Badge holder, lamp brackets, cable retention clips (fitted during
production process only)
• Chinstraps, sweatbands
• Winter liners, neck capes and summer liners
• High visibility stickers and shell customisation
Contact MSA for further information. Other accessories may be suitable,
please refer to the manufacturer's recommendations. Modification
of the product or accessories without the manufacturer's approval is
prohibited. Approved accessories shall be installed in accordance with
the manufacturer's recommendations. Information about how to attach
accessories on the helmets is available in each accessory manual.
10
Storage time
HDPE
2 years
ABS
3 years
3 years
3 years
Nylon
3 years
Service life*
+4 years
+5 years
+5 years
+5 years
+5 years
M
Av
Ce
les
ex
Le
d'e
Ve
s'a
As
1.
2.
3.
4.
5.
6.
Mi
Co
La
po
Ga
Co
La
po
Ga
Ho
Le
(U
uk
su