RS Pro RS-338 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Mini AC/DC Clamp/ English
Function
Range & Resolution
500mVAC
5 VAC
50 VAC
AC Voltage
500 VAC
(50/60Hz)
600VAC
AC Voltage ranges specified from 5% to 100% of range.
Below 10% of range,add 12 counts.
500Ω
5 KΩ
50 KΩ
Resistance
500 KΩ
5 MΩ
50 MΩ
50 nF
500 nF
5 μF
Capacitance
50 μF
500 μF
5mF
10Hz-100kHz
Frequency
Sensitivity:100V(<50Hz);50V(50 to 400Hz;15V(401Hz
to 100kHz)
Temp (type-K)
-20 to 760°C
(probe
accuracy not
-4 to1400°F
included)
NOTE: Accuracy is stated at 18˚C to 28˚C(65˚F to 83˚F) and less than 75% RH.
4
Accuracy (% of reading)
± (1.5% +10 digits)
± (2.0% + 5 digits)
± (1.0% + 4 digits)
± (1.5% + 2 digits)
± (2.5% + 3 digits)
± (3.5% + 5 digits)
± (5.0% reading + 20 digits)
± (3% reading + 5 digits)
± (4.0% reading + 10 digits)
± (5.0% reading + 10 digits)
± (1.5% reading + 2 digits)
± (3%rdg+5°C)
± (3%rdg+9°F)
02/12/2017 Version No. 001
Clamp size
Opening 0.75" (19mm) approx
Test current of 0.3mA typical; Open circuit voltage <3.3V
Diode Test
DC typical.
Continuity Check
Threshold <50Ω; Test current < 0.6mA
Low Battery Indication
"
" is displayed
Over range Indication
"OL" is displayed
Measurements Rate
2 per second, nominal
Input Impedance
10M (VDC and VAC)
Display
5000 counts LCD
AC Current
50-60Hz (TRMS AAC)
AC Voltage bandwidth
50-60Hz ( TRMS VAC)
Operating Temperature
5 to 40˚C (41 to 104˚F)
Storage Temperature
-20 to 60˚C- (4 to 140˚F)
Operating Humidity
Max 80%
Storage Humidity
<80%
Operating Altitude
7000ft. (2000meters) maximum.
Over voltage
Category III 600V
BatteryOne
9V Battery
Auto OFF
Approx. 30 minutes
Dimensions/Weight
206x74x42mm/183g
For indoor use and in accordance with EN-61010-1 2 edition.
Safety
It has been evaluated and complies with overvoltage CAT III.
Pollution degrees 2.
Button Descriptions
MODE Button
To select DC/ACV,OHM/ Diode/Continuity, °C/ °F.
REL Button
For DCA and Capacitance Zero & Offset adjustment.
Data Hold Button
For DCA and Capacitance Zero & Offset adjustment.
Data Hold Button
To freeze the LCD meter reading, press the data hold button. The data hold button is
02/12/2017 Version No. 001
Mini AC/DC Clamp/ English
5

Publicidad

Tabla de contenido
loading

Tabla de contenido