Mounting And Stacking Instructions; Installation - Tripp-Lite B004-008 El Manual Del Propietario

Mounting and Stacking Instructions

For convenience in large installations, the unit is supplied with the necessary hardware for rack
mounting in a 19" (1U) system rack, or stacked.
For Rack Mounting:
1. Screw the mounting brackets into the sides of the unit.
2. Slide the unit into the rack and secure it to the rack.

Installation

Make sure that power to all the devices (KVM Switch and PCs) you will be connecting have
been turned off.
1. Plug the monitor, keyboard, and mouse into the Console Ports
2. Use Tripp Lite P750 Series Cable Kits to connect each PC's monitor, keyboard and mouse
ports to one set of the KVM ports.
3. If you choose to use external power, connect the supplied adapter to the power socket on
the KVM switch and then plug the adapter into an AC power source. The unit is designed
for non-powered operation (it draws power from the computers via the keyboard and
mouse cables). If a computer only supplies 3.3V of power for the keyboard and mouse
instead of 5V (as in the case of Notebooks), you will need to use the external power
adapter.
NOTE: If you choose to use external power, the unit must be plugged in and receiving power prior to Step 4.
4. Turn on the power to the PCs.
4