Genie ZX-135/70 Manual Del Operario página 10

Manual del operario
Seguridad general
DANGER
Tip-over Hazard
Altering or disabling limit
switches can result in machine
tip-over. Machine tip-over will
result in death or serious injury.
Do not alter or disable limit
switch(s).
31060 C
DANGER
Lug Nut Torque
Dry bolts:
320 ft-lbs /
Tip-over Hazard
433.9 Nm
Failure to replace tires with tires
Foam-Filled Tire,
of same specification will result
Minimum New
in death or serious injury.
Weight:
850 lbs / 386 kg
Do not use air-filled tires.
Foam-filled tires are critical to
machine stability.
Do not replace factory-installed
tires with tires of different
specification or ply rating.
Tire Size
445D50/710, 18 ply Foam-filled
8
DANGER
Explosion / Burn Hazard
Ignition of explosive gases or contact with corrosive
acid will cause death, burns or blindness
Keep all open flames and sparks away. Wear
personal protective equipment, including face
shield, gloves and long sleeve shirt.
READ MANUALS
Read all manuals prior to operation.
DO NOT OPERATE equipment if you do not
understand the information in the manuals.
Consult your supervisor, the owner or the
manufacturer.
WARNING
1261816 A
DANGER
DANGER
Electrocution
Hazard
Contact with
Avoid contact
energized
with energized
components can
components.
result in death or
82237 B
serious injury.
31788 C
DANGER
Tip-over Hazard
Altering or disabling angle sensor
can result in machine tip-over.
Machine tip-over will result in
death or serious injury.
Do not move, alter or disable
angle sensor.
ZX-135/70
Primera edición • Sexta impresión
WARNING
Electrocution/Burn Hazard
Failure to disconnect all
the batteries before
performing service on this
machine may result in
death or serious injury.
Disconnect all the batteries
before performing service on
this machine.
97865 B
82314 B
N.º de pieza 160567SP