Installing The Wall Transmitter - Kichler JACE Manual De Instrucciones

INSTALLING THE WALL TRANSMITTER

WARNNING: HOOK UP 'IN SERIES"ONLY. DO NOT CONNECT NEUTRAL SUPPLY
WIRE OF ELECTRIC CIRCUIT TO THE TRANSMITTER WALL SWITCH, DAMAGE TO
THE TRANSMITTER WALL SWITCH AND POSSIBLE FIRE COULD OCCUR.
Step 1. Remove the existing wall plate and switch from the wall outlet box.(Fig.19)
Step 2. Make the electrical connections as shown in Fig.20 . If your outlet box has a
ground wire (Green or Bare Copper) connect the transmitter's ground wire directly
to one of the screws from the outlet box. Secure all wire connections with the plastic
wire nuts provides.
Step 3. Carefully tuck the wire connections inside the wall outlet box . Use the screws
provided to secure the wall transmitter and wall plate to the wall outlet box.
FACE PLATE
SCREW
OUTLET BOX
AC POWER
(BLACK)
RECEIVER LIVE
AC POWER
(BLACK) L
(BLACK)
FOR LIGHT
(BLUE)
TO MOTOR L
(BLACK)
TO MOTOR N
(WIHTE)
TO CEILING FAN
60" JACE
Fig. 19
WALL CONTROL
GROUND /EARTH
AC POWER
(WHITE) N
RECEIVER
Fig. 20
LED FAN | 17
TM