Sanus LMT1 Manual página 10

STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate
07
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between the top two fasteners: 4 3/4 in. (120.6 mm)
1. Position the wall plate template
2. Drill three (3) pilot holes (2 on top, 1 on bottom) using a 3/8 in. (10 mm) diameter masonry drill bit.
1
06
10
directly onto the concrete surface
on the wall at your desired height. Level the wall plate template and mark the hole locations.
06
4 3/4 in.
Min.
(120.6 mm)
Solid Concrete or Concrete Block Option
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-855-734-7805 to inquire about the
additional hardware.
2
06
3 in.
(75 mm)
3/8 in.
(10 mm)