Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install wall plate
using two lag bolts
07
plate.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
movement of the wall plate
3
06
and two washers
08
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
07
3 in.
(75 mm)
7/32 in.
(5.5 mm)
.
06
. Tighten the lag bolts only until they are pulled firmly against the wall
09
MUST BE firmly tightened to prevent unwanted
08
4
07
08
09
9
Publicidad
