Kohler K-5415 Guia De Instalacion página 4

2-1/8"
(54 mm)
7"
(178 mm)
1. Preparation
IMPORTANT! Before installing this sink, verify that the distance
from the top of the cabinet to the top of the doors is greater than
8-13/16" (224 mm).
TIP: Apply painter's tape to the cabinet to mark cuts and protect
cabinet surfaces when cutting.
Measure and mark the hole locations.
Drill 1" holes at each marked location.
Mark vertical lines from the hole to the top of the cabinet as
shown.
Cut along the marked lines to form two slots.
Notch the cabinet to accommodate the thickness of the sink rim.
The top of the sink should be flush with the top of the cabinet
when installed.
1224364-2-C
Sink Rim
Thickness
4 Kohler Co.